6 Operation
As soon as the dealer has prepared the FertiMiX-Go! for use, you can operate the
FertiMiX-Go!.
This section first explains how to operate the power switch and the FertiMiX pump.
After that, you will find instructions on how to operate the HortiMaX-Go! and set up
the irrigation program.
6.1 Power switch
The power switch is located on the FertiMiX cabinet.
Figure 6-1: The power switch.
Operation:
Turn to position I (on) to switch the FertiMiX on.
Turn to position 0 (off) to switch the FertiMiX off.
The power switch can also be used as an emergency stop. Turn the switch to
the 0 (off) position to switch off the FertiMiX-Go! immediately.
6.2 Operating the main FertiMiX pump
The knob to operate the FertiMiX pump is located on the cabinet. This knob has three
modes of operation: off, manual and automatic.
FertiMiX pump off
In the off mode, the FertiMiX pump is switched off and
cannot be activated by the controller. You can use this
function to:
stop the FertiMiX pump in an emergency
situation;
switch the FertiMiX-Go! off for a prolonged
period of time.
FertiMiX
44
To Next Page
Loading...