Rigol 2000 Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-305
:TRIGger:SHOLd:SLOPe
Syntax
:TRIGger:SHOLd:SLOPe <slope>
:TRIGger:SHOLd:SLOPe?
Description
Set or query the edge type of setup/hold trigger.
Parameter
Name Type Range Default
<slope> Discrete {POSitive|NEGative} POSitive
Return Format
The query returns POS or NEG.
:TRIGger:SHOLd:STIMe
Syntax
:TRIGger:SHOLd:STIMe <NR3>
:TRIGger:SHOLd:STIMe?
Description
Set or query the setup time of setup/hold trigger.
Parameter
Name Type Range Default
<NR3> Real 2ns to 1s 50ns
Explanation
This command is available when the hold type (refer to the
:TRIGger:SHOLd:TYPe command) is set to
SETup or SETHOLd.
Return Format
The query returns the setup time in scientific notation.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English