RIGOL Chapter 13 Specifications
User’s Guide for DG5000
13-6
Modulating
Waveforms
Square with 50% duty cycle (2 mHz to 1 MHz)
PWM
Carrier
Waveform
Pulse
Source Internal/External
Modulating
Waveforms
Sine, Square, Ramp, Noise, Arb (2 mHz to 50 kHz)
Width
Deviation
0% to 100% of Pulse Width
IQ
Carrier
Waveform
Sine (max. 200
MHz)
Sine (max. 200
MHz)
Sine (max. 100
MHz)
Sine (max. 70
MHz)
Source Internal/External
Code Pattern PN Sequence, 4 bits code pattern, User
IQ Mapping 4QAM, 8QAM, 16QAM, 32QAM, 64QAM, BPSK, QPSK, OQPSK, 8PSK, 16PSK,
User
Code Rate 1 bps to 1M bps
External Modulation Input
Maximum
Input Range
±5V
Input
Bandwidth
1MHz
Input
Impedance
10kΩ
Burst Characteristics
Carrier
Waveforms
Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier
Frequency
1 μHz to 120 MHz 1 μHz to 120 MHz 1 μHz to 100 MHz 1 μHz to 70 MHz
Burst Count 1 to 1 000 000 or Infinite
Start/Stop
Phase
0° to 360°
Internal Period 1 μs to 500 s
Gated Source External Trigger
Trigger Source Internal, External or Manual
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
