Rigol MSO5104 User Manual

Chapter 13 Pass/Fail Test RIGOL
MSO5000 User Guide 13-1
Chapter 13 Pass/Fail Test
During the product design and manufacturing process, you usually need to monitor
the variations of the signal or judge whether the product is up to standard. The
pass/fail test function of MSO5000 series oscilloscope can accomplish this task
perfectly.
Contents in this chapter:
◼ To Enable or Disable the Pass/Fail Test
◼ To Start or Stop the Pass/Fail Test Operation
◼ To Select the Source
◼ To Create a Mask
◼ To Save the Mask
◼ To Load a Mask
◼ To Set the Output Form of the Test Results
◼ To Enable or Disable the Display of the Statistics of the Test Results
◼ Statistics Reset

Rigol MSO5104 Specifications

General

Type	Tabletop
Product type	-
Bandwidth	100 MHz
Sampling rate	500000 MS/s
Channels quantity	16 channels
Minimum time base setting (per division)	3.5 ns
Display type	LCD
Display diagonal	9 \
AC input voltage	100 - 240 V
AC input frequency	45 - 440 Hz
Power consumption (max)	75 W
Non-operating altitude	3000 - 15000 m
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Width	367 mm