Rigol MSO5104 User Manual

RIGOL Chapter 1 Quick Start
1-18 MSO5000 User Guide
Touch Lock Key
Press this key to disable the touch screen function.
Note: By default, the touch screen function of the oscilloscope is
always enabled. If you disable the function, press the key again
to enable it.
Default
Press this key to restore the instrument to its factory default
settings.
Multifunction Knob
⚫ Non-menu Operation:
In non-menu-operation mode, rotate this knob to adjust the brightness of
waveform display. The settable screen brightness ranges from 1% to 100%.
Turn it clockwise to increase the brightness, and turn it counterclockwise to
decrease the brightness. Pressing Display → Intensity sets the waveform
brightness. You can also use the knob to adjust it.
⚫ Menu Operation:
In menu-operation mode, for the menu item that has multiple parameters under
it, when you press the menu softkey, rotate the knob to select the parameter
item, then press down the knob to select it (sometimes, the specified parameter
item can be selected by rotating the knob). The knob can also be used to modify
parameters, input the filename, etc.

Rigol MSO5104 Specifications

General

Type	Tabletop
Product type	-
Bandwidth	100 MHz
Sampling rate	500000 MS/s
Channels quantity	16 channels
Minimum time base setting (per division)	3.5 ns
Display type	LCD
Display diagonal	9 \
AC input voltage	100 - 240 V
AC input frequency	45 - 440 Hz
Power consumption (max)	75 W
Non-operating altitude	3000 - 15000 m
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Width	367 mm