Risco Agility Installer Manual


AgilityInstallerManual
Page D-2
Setting the Agility to comply with EN 50131 requirements
1. AccesstheInstaller programming mode.
2. Fromthe[1]Systemmenuselect[5]toaccessth e Settingsmenu.
3. FromtheSettingsmenuselect[4]toaccesstheStandardoption.
4. SelectEN50131.Onceselected,thefollowingchangeswilloccu rintheAg ilitysoftware:
Report Codes
Feature EN 50131 Compliance
Timers
 
PhoneLinecutdelay Immediate(0minutes)
EntryDelay 45seconds(maximumallowed)
ACDelay Immediate(0minutes)
JammingTime 0minutes
RXSupervision 2hours
SystemControls
 
QuickArm SettoNO
FalseCodeTrouble SettoYes
ForcedArming SettoNO
Authorizeinstaller SettoYES
OverrideTrouble SettoNO
RestoreAlarm SettoYES
MandatoryEventLog SettoYES
RestoreTrouble SettoYES
ExitAlarm SettoNO
20MinutesSignal SettoYES
EntryAlarm SettoNO
Attenuation SettoYES


Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup