Risco Agility Installer Manual


AgilityInstallerManual
Page 4-16
2.2 Modification
Themodificationmenuisusedtochangethevaluesoftheparametersconfiguredbythe
systemforeachwirelessdevice.Themodificationmenuisdividedintothefollowing
submenus:
1.Zones
2.RemoteControl(Keyfob)
3.Keypads
4.Siren
5.I/OExpander
Note:Thislistvariesaccordingtothedevicesthathavebeenallocatedtothesystem.Only
devicesthathavebeenallocatedcanbeconfiguredormodifiedbytheinstaller.
2.2.1 Zones
TheZonesmenuisdividedintothefollowingsub‐menus:
Parameters
Alarm(Sequential)Confirmation
SoakTest
ZoneCrossing(onlyviatheConfigurationsoftware)
Parameters
Note:Theparametersdisplayed,varyaccordingtothetypeofzonesconnectedtothe
system.
Zones: Parameters
Parameter Default Range
Label
Zone01/02/03/… Anycharacters
Alabelidentifiesthezoneinthesystem.Upto16characters).
SerialNumber
TheinternalIDnumberofthezone.EachwirelessdevicehasitsownuniqueIDnumber.
PlacingID00000000000willdeletethezone.
Partition
 
Thepartition(1to3)assignmentforeachzone.
Type 
Eachzonecanbedefinedasoneofthefollowingtypes:
NotUsed
 
Disablesazone.Allunusedzonesshouldbegiventhisdesignation.

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup