Risco Agility Installer Manual

AgilityInstallerManual
Page 4-37
Parameters
I/O Expander: Parameters
Parameter Default Range
SerialCode
 
TheinternalIDnumberoftheI/OExpander.Eachwirelessdevicehasitsownunique
serialnumber.
Controls
 
I/OExpanderSupervision
 
ChooseiftheI/OExpanderwillbesupervisedornot.
QuickOutputOperation
 
AusercanactivateaUOfromthebidirectionalremotecontrolorkeys
onthewirelesskeypadwithouttheneedtoenterhisusercode.
X‐10HouseID
 
Definesthehousecode,whichmatchesthecodedefinedbytheX‐10modules.
UODTMFControl
 
TheAgilityenablestoactivate8utilityoutputsfromremoteDTMFphone.Tooperatea
UOviathetelephoneyoumustassignaspecificUOtoadigitonthephone.
2.3 Identification
Thisoptionprovidestheabilitytoidentifytheserialnumberofawirelessdeviceinthe
systemfromakeypadorfromtheconfigurationsoftware.
Whenusingakeypadfollowthisprocedure:
GotoProgrammingÆRadioDevicesMenuÆIdentificationandpress .The
followingmessageappearsonthekeypadLCD:

Pressonthedevice’sLearnmode.Theserialnumberoftherelevantdeviceappearson
thekeypadLCD.

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup