Risco Agility Installer Manual


AgilityInstallerManual
Page 4-66
5. Siren
Siren
Parameter Default Range
CommTest
 
Displaystheresultsofthelastmeasurementperformedafterthelasttransmission(last
activationorlastsupervisionsignal).Toreceiveanupdatedsignalstrength,activatethe
sirenpriortoperformingthecommunicationtest.
BatteryTest
 
Speakerbatteriesvoltage:Teststheselectedsiren’sspeakerbatteriesvoltage.
Radio(Transceiver)batteriesvoltage:Teststheselectedsiren’sradioʹsbatteriesvoltage.
Version
 
Thismenudisplaysinformationregardingthesirenʹsversion.
6. GSM
GSM
Parameter Default Range
Signal(RSSI)
 
DisplaysthesignallevelmeasuredbytheGSMmodule.(0=Nosignal,5=Veryhigh
signal)
Version
 
DisplaysinformationregardingtheGSMcardversion.
7. IP Unit
IP Unit
Parameter Default Range
IPAddress
 
ViewtheIPaddressoftheAgility
Version
 
ViewtheversionontheIPcard
MACAddress
 
ViewtheMACaddressoftheIPcard

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup