AgilityInstallerManual
Page 4-39
Codes: User Codes
Parameter Default
Duress:Whencoercedintodisarmingthesystem,theusercancomplywiththe
intruderʹswisheswhilesendingasilentduressalarmtotheCentralStation.To
doso,aspecialduresscodemustbeused,whichwhenused,willdisarmthe
systemintheregularmanner,whilesimultaneouslytransmitting
theduress
alarm
.InanyothersituationtheDuressauthoritylevelbehavesasthesameas
theUserauthoritylevel.
3.2 Grand Master
TheGrandMasterCodeisusedbythesystemʹsownerandisthehighestAuthorityLevel.
Theownercanset/changetheGrandMasterCode.
Default:1234
Note:IntheConfigurationsoftwaretheGrandMasterisidentifiedasCode00.
3.3 Installer
TheInstallerCodeprovidesaccesstotheInstallerProgrammingmenu,allowing
modificationofallsystemparameters.TheInstallerCodeisusedbytheAgilityinstallation
companytechniciantoprogramthesystem.
TheInstallercanchangetheInstallerCode.
Default:0132
3.4 Sub-Installer
TheSub‐InstallerCodeallowslimitedaccesstoselectedparametersfromtheInstaller
Programmingmenu.ItisusedbyatechniciansentbytheAgilityinstallationcompanyto
carryoutrestrictedtasksdefinedatthetimeofsysteminstallationbytheinstallation
technician.TheSub‐Installercanaccesswithhiscode
onlythoseprogrammingmenus
predefinedforhisaccess.Default:0232
3.5 Code Length
TheCodeLengthspecifiestheminimumnumberofdigitsrequested.Default:4digits
Notes:
WhenyouchangetheCodeLengthparameter,allUserCodesaredeletedandmustbere‐programmedor
downloaded.
Fora6‐digitCodeLengthsystem,4‐digitdefaultcodeslike1‐2‐3‐4(GrandMaster),0‐1‐3‐2(Installer),and0‐
2‐3‐2(Sub‐Installer)become1‐2‐3‐4‐0‐0 ,0‐1‐3‐2‐0‐0,and0‐2‐3‐2‐0‐0,respectively.
IfyouchangetheCodeLengthbackto4digits,thesystemcodesarerestoredtothedefault4‐digitcodes.