Risco Agility Installer Manual

AgilityInstallerManual 
Page 2-5
Connecting the Backup Battery
TheAgilityhassafetyapproved,sealedleadacid6V,3.3Ahrechargeablebackupbattery
usedintimeofmainpowerfailure:
Note:ThebatteryisnotsuppliedwiththeAgility.
ToinserttheBackupbattery:
Removethebatterycompartmentcoverscrew(seeFigure5,3)locatedatthetopofthe
coverbyturningscrewcounterclockwiseandpulltheAgilitybatterycoveroutward.
1
2
2
3

Figure5:BatteryCompartment
a.Insertthebatteryintoitsplaceandconnecttheflyingleadstothebattery
accordingtothecorrectpolarity(Red+)(Black‐).
b.Returnthebatterycompartmentcover(afterplacingthebatteryin)andsecure
withlockingscrew.
Note:TheAgilityRechargeablebatteryshouldbechargedforatleast24hours.

Important:Whenreplacingthebatterybesuretobuythesametype.Failuretocomplywiththisinstruction
mayresultindamagetopersonneland/orequipment.
Disposeofusedbatteriesaccordingtotheproperinstructions.

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup