Risco Agility Installer Manual

 AgilityInstallerManual
Page 2-2
Mounting the Agility
IMPORTANT:TheAgilityhasnouserreplaceableparts(forinstance:powercord,fuse,battery,etc.)
onlycertifiedinstallersareallowedtoreplacefaultyparts.
Choosing the mounting location
BeforeyoumounttheAgility,studythepremisescarefullyinordertochoosetheexact
locationoftheunitforthebestpossiblecoverageandyeteasilyaccessibletoprospective
usersofthealarmsystem.
ThemountinglocationoftheAgilityshouldbe:
Trytocentrallylocatethesystembetweenallthetransmitters.
NearanuninterruptedACoutlet.
Nearatelephoneoutlet.
Farfromsourcesofinterference,suchas:
 Directheatsources
 Electricalnoisesuchascomputers,televisionsetc.
 Largemetalobjects,whichmayshieldtheantenna.
InaplacewherethealarmcanbeheardduringPartArmingmode.
Wall Mounting the Agility
TheAgilityiscomprisedoftwosub‐assemblies:
Mountingbracket,
Mainunitwhichinitsturniscomprisedfrom:
 Frontpanel(notdisassembledonaregularinstallationprocedure)
 Backpanel
Themountingbracketismountedonthewall,usingthesuppliedproperhardware,as
describedbelow:
TomounttheAgilityontheWall:
1. SeparatetheMountingbracketasfollows:
a. ReleasetheMountingbracketcaptivelockingscrews(1,Figure2)locatedatthe
bottomoftheunitbyturningscrewscounterclockwise.
1

Figure2:MountingBracketscrews

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup