Risco Agility Installer Manual


AgilityInstallerManual
Page 4-42
Communication Type: PSTN
Parameter Default Range
AnsweringMachineOverride
 
YES:TheAnsweringMachineOverrideisenabled,asfollows:
 Thecon figur ationsoftwareatth e alarmcompanycallstheaccount.
 Thesoftwarehangsupafteron e ringbytheconfigurationoperator.
 Withinoneminute,thesoftwarecallsagain.
 Thesys temisprogramm edtopickupth is secondcallonthefirstring,thus
bypassingany interactionwiththeanswer ingmachine.
Note:Thisfeatureisusedtopreventinterferencefromanansweringmachinewithremote
configurationoperations.
NO:TheAnsweringMachineOverrideisdisabled,andcommunicationtakes
placeinthestandardmanner.
Parameters
 
RingstoAnswer
12 01to15
Thenumberofringsbeforethesystemanswersanincomingcall
Areacode
 
Thesystemareatelephonecode.Thiscodewillbedeletedfromatelephone
numberwhilethesystemtriestodialthenumberthoroughtheGSMnetwork.
PBXPrefix
 
Anumberdialedtoaccessanoutgoinglinewhenthesystemisconnectedtoa
PrivateBranchExchange(PBX)andnotdirectlytoaPSTNline.Thisnumber
willbeaddedautomaticallybythesystemwhiletryingtocallfromaPSTNline.
4.1.2 GSM
TheGSMscreencontainsparametersforthecommunicationofthesystemoverthe
GSM/GPRSnetwork.
Method: GSM
Parameter Default Range
Timers
 
AllowstoprogramtimersrelatedtooperationwiththeGSMmodule
GSMLost
10min 001‐255min
ThetimeafterwhichtheGSMmoduleregardstheGSMnetworkasloss.
NetworklossisdefinedasRSSIlevelbelowtheleveldefinedGSMNetwork
Sensitivityparameter.

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup