Risco Agility Installer Manual


AgilityInstallerManual
Page 4-44
Method: GSM
Parameter Default Range
GPRS
 
AllowsprogrammingparametersthatrelateforthecommunicationovertheGPRS
network.
AccessPointNetwork(APN)Code
 
ToestablishaconnectiontotheGPRSnetworkanAPN(AccessPointName)
codeisrequired.TheAPNcodediffersfromcountrytocountryandfromone
providertoanother(theAPNcodeisprovidedbyyourcellularprovider).
ThesystemsupportsanAPNcodefieldofupto30alphanumeric
charactersand
symbols(!,&,?etc).
APNUserName
 
EnterAPNusername(ifrequired).TheUsernameisprovidedbyyour
provider.Thesystemsupportsausernamefieldofupto20alphanumeric
charactersandsymbols(!,&,?etc).
APNPassword
 
EntertheAPNpassword(upto20alphanumericcharactersandsymbols.)as
providedbyyourprovider(ifrequired).
E‐mail
 
ThefollowingprogrammingparametersareusedtoenablesendingFollowMeevent
messagesbye‐mailthroughGPRS.
Note:Toenablee‐mailmessaging,theGPRSparametershavetobedefined.
MailHost
 
TheIPaddressorthehostnameoftheSMTPmailserver
SMTPPort
 
TheportaddressoftheSMTPmailserver
Emailaddress
 
TheEmailaddressthatidentifiesthesystemtothemailrecipient.
SMTPUserName
 
AnameidentifyingtheusertotheSMTPmailserver.Theusernamefieldcan
includeupto10alphanumericcharactersandsymbols(!,&,?etc).Provisionfor
futurefunctionality
SMTPPassword
 
ThepasswordauthenticatingtheusertotheSMTPmailserver.Thepassword
canincludeupto10alphanumericcharactersandsymbols(!,&,?etc).Provision
forfuturefunctionality

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup