Risco Agility Installer Manual


AgilityInstallerManual
Page 4-46
Method: GSM
Parameter Default Range
PrepaidSIMCard
 
AllowsprogrammingparametersthatwillbeusedwhenaprepaidSIMcardisusedin
thesystem.
GetCreditby
 
Dependingonthelocalnetworkprovider,theusercanreceivethecreditlevelofthe
prepaidSIMcardbysendingapredefinedSMScommandtoadefinednumberorby
callingapredefinednumberthroughthevoicechannel.Theactivationofthecredit
requestcanbedonebytheGrandMaster.

 SMSCreditMessage:Typeinthemessag ecommandasdefinedbythe
providerandtheprovider ’s phonenum b er towhichthecreditlevelSMS
messagerequestwillbesent.
 VoiceCredit:Ty peinthe provider’sph onenumber towhich acallwillbe
established
 ServiceCommand:Typeintheservicecommandmessageasdefinedbythe
provider

PhonetoGetCreditMessage
 
Theprovider’sphonenumbertowhichthecreditlevelSMSmessagerequest
willbesenttooracallwillbeestablished,dependingontheselectioninthe
GetCreditbyparameter.
PhonetoReceiveSMSCreditMessage:
 
Theprovider’stelephonenumberfromwhichanautomaticSMScreditstatus
messagewillbesentfrom.
4.1.3 IP
Communication Type: IP
Parameter Default Range
IPConfiguration
 
ObtainAutomaticIP
YES Y/N
DefineswhethertheIPaddress,whichtheAgilityrefersto,isstaticordynamic.
YES:ThesystemreferstoanIPaddressprovidedbytheDHCP.
NO:ThesystemreferstoastaticIPAddress.
PanelIP
 
TheAgilityIPaddress

Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup