Risco Agility Installer Manual


AgilityInstallerManual
Page 4-48
MSKeepAlive
00000 0‐65535
Thetimeperiodthatthesystemwillestablishautomaticcommunication(polling)with
theMSovertheIPnetwork,inordertochecktheconnection.
3pollingtimescanbedefined:Primary,SecondaryandBackup.Foreachtimeperiod
definethenumberofunitsbetween1‐65535.Eachunitrepresentsatime
frameof10
seconds.
Note:WhenusingthepollingfeaturethroughIP,theMSchannelparametermustbedefinedasIPonly.
TheuseofthesetimeperiodsdependsonthereportingordertotheMSdefinedbythe
ReportSplitMSUrgentparameter(See:[4]Communication>[2]MS>[7]ReportSplit)
 Primary:Th istimeperiodisusedwhenthe MSchannelisdefinedasIPOnly
andthe ReportSplitparameterisnotdefinedas1
st
backup2
nd
.
Default:00006(60seconds)
 Secondary:ThistimeperiodisusedwhentheMS2channelisdefinedas
IP
Æ IPOnlyandtheReportSplitparameterisdefinedas1
st
backup2
nd
.
Default:360(3600seconds)
 Backup:Thistimeperiodwillbeassignedtothebackupchannelinthe 
followingcase:

MS2channelisdefinedasIP Æ IPOnly

ReportSplitparameterisdefinedas1
st
backup2
nd

ThecommunicationwithMS1isdisconnected.

Default:00006(60seconds)


Risco Agility Specifications

General

Remote Management	Yes
Mobile App	Yes
Voice Module	Optional
Backup Battery	Yes
Two-Way Voice	Yes
Event Reporting	Yes
Remote Control	Yes
Siren Output	Yes
Type	Wireless
Communication	GSM
Compatibility	Risco accessories
Power Supply	Mains powered with battery backup