GX-3R Pro Operator’s Manual Chapter 5: User Mode and Calibration • 100
2. Press and release POWER MODE. The current WARNING 1 TIME setting flashes.
3. Use AIR to adjust the WARNING 1 TIME.
4. Press and release POWER MODE to save the setting.
5. Repeat Step 3 and Step 4 for the WARNING 2 TIME and ALARM TIME settings.
6. The instrument returns to the MAN DOWN menu.
7. See “ESCAPE” on page 101 to return to User Mode.
ESCAPE
1. While in the MAN DOWN menu, press AIR to scroll to ESCAPE.
2. Press and release POWER MODE. The instrument returns to User Mode.
3. See “Returning to Measuring Mode (START MEASURE)” on page 117 to return to
Measuring Mode.
For all settings:
1) AIR to adjust
2) POWER MODE
to save and
MAINTE 7:49
60 SEC
WARNING 1 TIME
MAINTE 7:49
PANIC
MAN DOWN TIME
ESCAPE
MAN DOWN MENU
MAINTE 7:49
90 SEC
ALARM TIME
continue
MAINTE 7:49
75 SEC
WARNING 2 TIME
To Next Page
Loading...
