99 • Chapter 5: User Mode and Calibration GX-3R Pro Operator’s Manual
Turning Panic On/Off
ON: A Panic Alarm can be initiated by firmly tapping the instrument twice in a row.
OFF (factory setting): A Panic Alarm cannot be initiated.
1. While in the MAN DOWN menu, use AIR to place the cursor next to PANIC.
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the MAN DOWN menu.
5. See “ESCAPE” on page 101 to return to User Mode.
Setting the Man Down Warning/Alarm Times (MAN
DOWN TIME)
The Man Down Warning/Alarm times are the amount of time that has to pass between a Man
Down detection and each warning/alarm. They can be set in 1 second increments from 10 - 120
seconds. When setting the Man Down Warning/Alarm times, keep in mind that ALARM TIME
WARNING 2 TIME WARNING 1 TIME.
1. While in the MAN DOWN menu, use AIR to place the cursor next to MAN DOWN TIME.
Warning/Alarm Factory Setting
WARNING 1 TIME 60 seconds
WARNING 2 TIME 75 seconds
ALARM TIME 90 seconds
MAINTE 7:49
MAN DOWN
PANIC
MAN DOWN TIME
MAN DOWN MENU
MAINTE 7:49
PANIC
MAN DOWN TIME
ESCAPE
MAN DOWN MENU
To Next Page
Loading...
