Installation
20220596E 95
Abbreviated
name
Equipment / Usage NOTES
GPS1 Primary GPS Can be used as either NAV
GPS2 Backup GPS source or POS source. Also for VTG
data for automatic
LC 1 Primary Loran AUTO HI/LO speed selection
LC 2 Backup Loran
NAV1 Chart plotter
NAV2 Other Nav source like
Decca etc.
INSTR Source of data for
instrument screens and
automatic HI/LO
parameter selection
Log input (VHW) for speed data has
priority to SOG from GPS navigator.
RFC For use when selecting
between Robertson
fluxgate compasses
RFC35 fluxgate compass is
connected to junction unit. RFC35R
rate compass is connected to Robnet
MAGN Magnetic compass with
course detector (CD100)
CDI35 +CD100 is connected to
junction unit.
CD100 only must be connected to
CI300X.
FLUXG For use with non-
Robertson fluxgate
compasses that output
SIN/COS
Optional CI300X item.
GYRO For use with Robertson
RGC50, RGC10 gyro
Optional CI300X item. True data
displayed for heading, COG and
bearing to waypoint
Output INSTR For high speed NMEA
output of compass
heading
HDM or HDT output increased
from 1 to 5 times/sec. on TX1 port
Output
RADAR
Clock/data heading
output to radars
Selectable between Anritsu and
Furuno. (On both J300X and
NI300X)
To Next Page
Loading...