Alwayscomply with local, state, province and federal laws, regulationsand directives, and always operate the Solution in
compliance with automation safety and general machine safety guidelines.
Do not use the Solution to handle boxescontaining hazardous substances. Should hazardous substancesbe handled by the
Solution, perform a risk assessment that accounts for such substances.
CAUTION
Since there are numerous different materialsused in the packaging industry, and since each
material has its own characteristics, properties and behavior with vacuum pressure, a thorough risk
assessment isin order, regardlessof the box/packaging material.
2.3.2.Misuse
WARNING
The unit should be used exclusively within the range of its technical data. Any other use of the
Solution is deemed improper and unintended. Robotiq will not be liable for any damages resulting
from any improper or unintended use of the Solution.
Any use of the Solution other than that described in thismanual is considered a misuse and should be avoided.
Misuse of the Solution includesbut isnot limited to the following situations.
Integration misuse:
l
Use of the Solution with a robot other than a UR20.
l
Use of a payload higher than the robot’s maximum payload.
l
Use of the Solution outside of the environmental and operating conditions.
Operational misuse:
l
Standing on the pallet.
l
Operation of the Solution by inexperienced or untrained staff members.
l
Manual placing or adjustment of a box on the pallet while the Solution is in operation.
16
To Next Page
Loading...
