ROBOTIQ PE20 - Required Tools and Equipment

3.2.Required ToolsandEquipment
The following toolsare required to install the Palletizing solution.
Included:
l
1 x 1/2 in x 6 in concrete drill bit
l
1 x 13 mm socket, 3/8 in square drive
l
1 x 16 mm socket, 3/8 in square drive
l
1 x 17 mm socket, 3/8 in square drive
l
1 x 3/4 in socket, 3/8 in square drive
l
1 x 8 mm hex bit socket, 3/8 in square drive
l
1 x 10 mm hex key, L-shape
l
1 x 5 mm hex key, L-shape
l
1 x 2 mm hex key, L-shape
l
1 x 8 mm / 10 mm double-ended wrench
l
1 x 2.4 mm flat screwdriver
Included with PowerPick20 (Optional)
l
1 x 6 mm hex key, L-shape
l
1 x 21 mm / 24 mm double-ended wrench
Not included:
l
Forklift or pallet jack (minimum fork length of 1065 mm [42 in])
l
Hoisting equipment (minimum payload capacity of 200 kg [440 lb])
l
2 x Twisted eye web sling (minimum payload capacity of 100 kg [220 lb])
l
Power screwdriver
l
#2 Phillipsbit (or #2 Robertson bit)
l
Utility knife
l
3/8 in drive ratcheting socket wrench or adapter
l
3/8 in drive torque wrench or adapter with minimum torque range of 15 - 84 Nm (11 - 62 lb-ft)
l
Rotary hammer drill
l
Hammer
23