ROBOTIQ PE20 - Page 22

o
1x USB-to-Ethernet adapter
o
1x Pneumatic adapter 1/2 BSPP(1/2 G)to 1/2 NPT (included but optional)
l
1 x Installation tool kit:
o
1 x 1/2 in x 6 in concrete drill bit
o
1 x 13 mm socket, 3/8 in square drive
o
1 x 16 mm socket, 3/8 in square drive
o
1 x 17 mm socket, 3/8 in square drive
o
1 x 3/4 in socket, 3/8 in square drive
o
1 x 8 mm hex bit socket, 3/8 in square drive
o
1 x 10 mm hex key, L-shape
o
1 x 5 mm hex key, L-shape
o
1 x 2 mm hex key, L-shape
o
1 x 8 mm / 10 mm double-ended wrench
o
1 x 2.4 mm flat screwdriver
l
1 x PowerPick20 Vacuum Gripper standard kit (optional):
o
1 x PowerPick20 vacuum generation unit
o
1 x Mounting bracket and filter-regulator assembly
o
1 x M12-12 pin I/O cable
o
1 x Powerpick20 Vacuum Gripper, default configuration
o
1 x Large suction cup bracket assembly
o
Air tubing
o
Toolsand hardware for installation on PE20
22