Introduction
12
Operating conditions
To ensure that the meter functions properly, please observe the following guidelines:
■ Operate the meter only within the acceptable temperature range*. This range is test-
dependent:
– For cholesterol 18-35 °C
– For glucose 18-35 °C
– For triglycerides: 18-30 °C
– For lactate 15-35 °C
■ Only use the meter at a relative humidity between 10% and 85% (no condensation).
■ When testing, place the meter on a level, vibration-free surface, or hold it so it is roughly
horizontal.
* Please note: Different temperature ranges apply for Accutrend Controls. Refer to the package
insert for details.
To Next Page
Loading...
