Memory
67
English
Deleting the last result
3 To delete the last result (dEL LASt dis-
play), press the Set button. The related
test parameter is displayed.
4 To delete the displayed result from mem-
ory, press and hold down the Set button
for more than 3 seconds. While you
hold down the button, the selected result
flashes. At the same time you will hear a
short beep once a second.
After 3 seconds the result is deleted from
memory and a dash appears briefly to confirm
deletion (see illustration on the left). Once you
release the Set button, you automatically exit
the delete mode.
To Next Page
Loading...
