Meter Setup
29
English
Setting the beeper
After setting the time, you can set the beeper by choosing On or OFF.
If the beeper is activated, you will hear a beep in the following situations:
■ When the meter detects that the test strip is inserted.
■ When the result appears.
■ When an error occurs.
13 Press the M button to toggle between OFF
and On (On is the default setting).
14 Press the Set button to save the selected
setting. The display automatically moves
on to the next setting option.
We recommend that you keep the beeper activated at all times.
To Next Page
Loading...
