Memory
66
Deleting results from memory
You can choose between three different deletion options:
■ You can delete the last result.
■ You can delete all results of a single test parameter at once.
■ You can delete all results of all test parameters at once.
1 Power on the meter by pressing the Set
button (on the left side of the meter).
The date and time as well as the icon set
now appear on the display.
2 Now press the M button to display the
options for deleting results from memory.
You can exit delete mode at any time by
pressing the On/Off button .
All the following descriptions start with
this display (dEL LASt).
It is not possible to delete a single result (unless it is the last result).
To Next Page
Loading...
