Performing a Test
53
English
Assigning additional information to a measurement:
Optionally, you can assign one of nine differ-
ent events to a test. The event “0” represents
“no flagging”. If used, you must define the
events and their respective event numbers
yourself. Make sure that your assignments are
unique and reproducible.
17 Press the Set button (after inserting the
test strip or when the result is displayed)
to flag the measurement with an event.
Pressing the Set button increases the dis-
played event number in increments of
one. After event “9”, the event display is
reset to “0”.
To Next Page
Loading...
