Control and Proficiency Testing • 5
131
11 Enter or scan the sample ID.
The hourglass icon shows that the test strip is warming
up. When the warming-up process is complete, a further
beep (provided the beeper is enabled) indicates that you
can now apply the proficiency sample.
The dropper icon flashes to indicate that the meter is
ready to perform the test and is waiting for the sample to
be applied.
A countdown begins at the same time. You must apply
the sample within the displayed time or an error message
will be displayed.
Profi ciency
09:15 am
05/29/2015
QC: 202
Code: 101 Par: aPTT
Sample ID
A
202|
BCDE
FG
HI J
KLMNO
PQRST
UVWXY
Z 123
09:15 am
Scan
,
Profi ciency
09:15 am
05/29/2015
1:35 Min.
QC: 202
Code: 101 Par: aPTT
To Next Page
Loading...
