Meter Setup • 3
49
3.2 Screen setup
The Screen setup area contains the options for changing
the display.
Contrast Use the Contrast menu to adjust the display to your ambi-
ent light conditions and make it easier to read.
1 From the Main Menu, touch Setup to open the
meter settings.
2 From the Setup Menu, touch Screen.
3 From the Screen menu, touch Contrast.
4 Touch or to change the contrast in a range
from 0 to 10.
■ Contrast “0” makes the display very dark.
■ Contrast “10” makes the display very light.
5 Touch to save this setting, or touch to exit
this menu without saving any changes. The display
automatically returns to the previous screen.
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Screen
09:15 am
05/29/2015
Language Selection
Result Confi rmation
Date / Time
Result Units
Contrast
If a button is grayed out, this means the function is not
available.
Contrast
09:15 am
05/29/2015
Contrast (0-10):
5
To Next Page
Loading...
