60
Beeper The CoaguChek Pro II meter can display information visu-
ally and alert you to special circumstances with a Beeper.
The meter always beeps when it is switched on. When the
Beeper function is enabled the meter beeps once when:
■ it detects a test strip
■ pre-heating of the test strip is complete and you
need to apply a sample
■ it detects a sample
■ the test is completed and the results are displayed
(a long beep)
■ an error occurs (three short beeps)
■ an external power adapter is connected when the
meter is on
■ the meter is docked
■ a barcode is scanned
You can also activate a Key Click. When a Key Click is
enabled, the meter clicks briefly every time a button is
touched, facilitating the input of information.
We recommend that you keep the Beeper enabled at all
times.
To Next Page
Loading...
