Roche CoaguCheck Pro II - Scan QC Material

90
Scan QC Material The barcode scanner of the CoaguChek Pro II meter can
be used to scan barcodes from QC material vials.
1 From the Main Menu, touch Setup to open the
meter settings.
2 From the Setup Menu, touch QC Settings.
3 From the QC Settings menu, touch Scan QC
Material.
4 Touch Optional to allow manual selection of a QC
lot number from a list or touch Scan Only to
prohibit manual selection. Your selection is now
highlighted.
5 Touch to save this setting, or touch to exit
this menu without saving any changes.
QC Settings
09:15 am
05/29/2015
Lockouts
Scan QC Material
QC Range
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Scan QC Mat.
09:15 am
05/29/2015
Optional
Scan Only