76
Operator ID
In the default setting, the Operator login is not activated.
You can either activate or deactivate Operator login on
the meter. If activated, an Operator has to log in before
the Main Menu will be displayed and measurements can
be performed.
To activate Operator login:
1 From the Main Menu, touch Setup to open the
meter settings.
2 From the Setup Menu, touch ID Setup.
3 From the ID Setup menu, touch Operator.
4 Touch the button with the setting of choice for set-
ting up the Operator login. Your selection is now
highlighted.
5 Touch to save this setting, or touch to exit
this menu without saving any changes. The display
automatically returns to the previous screen.
If you want to create a list of Operator IDs from which
you can select an operator, additional software (a data
management system) and the Handheld Base Unit are
required (for more details see “Data handling”, starting
on page 139).
ID Setup
09:15 am
05/29/2015
Patient
Operator
Admin.
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Operator ID
09:15 am
05/29/2015
Inactive
Activ
e
To Next Page
Loading...
