Meter Setup • 3
55
Setting the time When you power on the meter for the first time (or after a
long period without power), this Time setup menu
appears automatically after you set the date. If at a later
time a time adjustment is needed, go to the Setup Menu,
then select the menu of choice.
1 From the Main Menu, touch Setup to open the
meter settings.
2 From the Setup Menu, touch Screen.
3 From the Screen menu, touch Date/Time.
4 From the Date/Time menu, touch Set Time.
5 Touch and to set the hours, then the min-
utes.
6 Touch to save this setting, or touch to exit
this menu without saving any changes. The display
automatically returns to the previous screen.
If this setup menu appeared automatically after powering
the meter on, you must touch to complete the first
time setting.
7 Touch to return to the Screen menu.
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Screen
09:15 am
05/29/2015
Language Selection
Result Confi rmation
Date / Time
Result Units
Contrast
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Date/Time
09:15 am
05/29/2015
Format
Set Time
Set Date
Time
09:15 am
05/29/2015
Minute:
59
Hour:
9
AM PM
To Next Page
Loading...
