Meter Setup • 3
75
Deactivating an existing Admin. ID:
1 From the Main Menu, touch Setup to open the
meter settings.
2 From the Setup Menu, touch ID Setup.
3 Using the keypad displayed on the screen, enter the
current Admin. ID.
The ID Setup menu is displayed. The Admin. button is
highlighted, which means an Admin. ID is active.
4 Touch Admin.
5 Immediately touch to close the keypad on the
screen without entering a password.
The Admin. ID has been deleted and therefore deacti-
vated. The Admin. button is no longer highlighted.
Admin.
A
***|
BCDE
FGHI J
KLMNO
PQRST
UVWXY
Z 123
09:15 am
ID Setup
09:15 am
05/29/2015
Patient
Operator
Admin.
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
ID Setup
09:15 am
05/29/2015
Patient
Operator
Admin.
Admin.
A
|
BCDE
FGH I J
KLMNO
PQRST
UVWXY
Z 123
09:15 am
To Next Page
Loading...
