Roche CoaguCheck Pro II - Page 89

Meter Setup • 3
89
1 From the Main Menu, touch Setup to open the
meter settings.
2 From the Setup Menu, touch QC Settings.
3 From the QC Settings menu, touch Lockouts.
4 From the Lockouts menu, touch STAT Test Config.
5 Touch Enable to allow STAT Tests or touch
Disable to prohibit STAT Tests. Your selection is
now highlighted.
6 If you have enabled the option, touch and to
set the number of additional tests.
7 Touch to save this setting, or touch to exit
this menu without saving any changes.
QC Settings
09:15 am
05/29/2015
Lockouts
Scan QC Material
QC Range
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Lockouts
09:15 am
05/29/2015
Operator Lockout
QC Lockout
ST
AT Test Confi g.
STAT Test
09:15 am
05/29/2015
Enable
Disable
3