Meter Setup • 3
61
1 From the Main Menu, touch Setup to open the
meter settings..
2 From the Setup Menu, touch Options.
3 From the Options menu, touch Beeper.
The current setting is highlighted. You may select from
the following options:
For the Beeper
■ Off
■ Low
■ Medium
■ High
For the Key Click
■ On
■ Off
4 Touch the button with the desired setting for the
Beeper, then touch the button with the setting of
choice for the Key Click. Both selections are now
highlighted.
5 Touch to save this setting, or touch to exit
this menu without saving any changes. The display
automatically returns to the previous screen.
Options
09:15 am
05/29/2015
Auto Off
Connection
Beeper
Sor
t
Parameter Selection
Setup Menu
09:15 am
05/29/2015
QC Settings
ID Setup
Diagnostics
Options
Screen
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Beeper
09:15 am
05/29/2015
Key Click:
On Off
Low
Medium
High
Off
To Next Page
Loading...
