Review Results (Memory) • 6
135
4 Touch Review Results.
5 Select the type of results you want to view.
■ Display Patient Result memory
■ Display QC Result memory
6 Select the test parameter(s) you want to view.
The following buttons for general use are located in the
views described below:
Menu icon: Return to main menu
Return icon: From the single-result display, return to the
list of results
Individual icon: List that contains entries for this patient
only
Printer icon: The printer icon only appears if the printer
function is activated. Otherwise it is not displayed.
QR Code icon: The QR code icon only appears if the QR
code display is activated. Otherwise it is not displayed.
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Memory
09:15 am
05/29/2015
QC Result
Patient Result
Memory
09:15 am
05/29/2015
PT
aPTT
All results
For displaying patient results:
Parameter selection is only available, if the sort order
has been set to “Date/Time” (see page 58). If the sort
order has been set to “Patient ID” or “Patient Name” the
patient result screen is shown directly.
To Next Page
Loading...
