Appendix • B
173
Operator:
1 Touch Patient Test.
Perform the patient test as usual. Once the test is com-
pleted, the observer has to complete the next steps.
2 Hand the meter back to the observer.
Observer:
3 Touch to log in again.
4 After you enter your password, touch to
proceed with the assessment.
5 Assess the operator’s performance by touching
Pass or Fail.
6 Assess the test result by touching Accept or
Reject.
7 Touch to add a comment.
8 Touch to return to the Pat. Test - OTS screen.
The OTS information is saved together with the test result.
Pat. Test - OTS
09:15 am
05/29/2015
Observer Login
Patient T
est
OTS enabled
Remove
09:15 am
05/29/2015
Observer Login
Observer ALAN SMITHEE,
please log in to proceed.
Otherwise the OTS test will
not be complete.
I-010
Observer
09:15 am
05/29/2015
Fail
Accept
Pass
Reject
OTS passed:
Measurement Result OK?
Comment:
To Next Page
Loading...
