180
■ The CoaguChek Pro II meter is capable of transfer-
ring to a suitable DMS, via WLAN, a data set of up
to 1000 result records, 100 strip and control lot
records, and 500 operator ID records in less than 15
minutes, when operated in a typical WLAN environ-
ment (correct WLAN administration, typical popu-
lation of other clients present, any of the supported
security models enabled).
■ Immediately after the test has been completed
(and returning to the main menu screen), the
CoaguChek Pro II meter will attempt to connect to
the DMS. In line with the industry communication
standard POCT1-A, the DMS must acknowledge
the meter’s request for connection and actively
query for the result. Only upon receipt of this DMS
query, the meter will send the result. Hence the
effective time for transmitting results depends on
infrastructure, DMS workload, etc. Once the DMS
sends a query, however, the meter will respond
within a few seconds.
■ A CoaguChek Pro II meter with wireless connectiv-
ity enabled will communicate results after every test
or, when the meter is idle; it will automatically
attempt to communicate with the DMS every
10 minutes.
To Next Page
Loading...
