32
The following icons may appear when using the meter in
conjunction with a data management system (DMS).
Room or meter temperature is outside the acceptable range
The test strip guide cover is open
Reports a status message (see: Chapter 9, Troubleshooting)
Reports an error message or a warning (see: Chapter 9, Troubleshooting)
Lockout, one or more parameters are locked
Button/Icon Meaning
QC!
Button/Icon Meaning
Communication is taking place via the infrared interface
■ If displayed in the status bar: communication is taking place via
WLAN
■ If displayed on the Patient Test button: connectivity lockout, only
STAT testing possible
An OTS request is pending
Cleaning/Disinfection necessary
Patient test result is out of normal patient test range
To Next Page
Loading...
