40
After inserting a new battery pack, the meter powers on
automatically.
■ The Roche logo is displayed. If the meter does not
power on automatically, the battery pack may be
empty. Connect the power adapter for a minimum
of 30 minutes, then remove the plug and try to
power the meter on. If it powers on, the battery
pack is charging properly.
■ Within a short period of time, the start screen
should appear.
■ If the meter has been without power for too long, it
will show the date and time settings dialog and you
have to re-enter the date and time settings.
■ The screens for entering the date and the time
appear.
7 Enter the date and time. After you have entered the
correct information, confirm each screen with .
After installing a new battery pack, the meter should be
charged for two hours before testing.
Date
09:15 am
05/29/2015
Month:
5
Day:
29
Year:
2015
Time
09:15 am
05/29/2015
Minute:
59
Hour:
9
AM PM
To Next Page
Loading...
