6.4
Position the cursor (flashing broken line) under the desired setting by
moving it to the left or right with the cursor button “<” or “>”.
Press the “↵” button to confirm the selection and to proceed to the
next menu item.
If you only press “↵”, the old setting is maintained.
The menu can be exited at any time by pressing the cursor buttons
“<” and “>” simultaneously. In this case the instrument initiates the
normal start-up procedure.
The menu can also be exited by switching off the instrument.
You can also exit the menu by means of the prompt shown on the
left, which appears at the end of the menu.
If you select “YES” and confirm with “↵” the instrument will initiate the
normal start-up procedure.
If you answer “NO” and then confirm, “LANGUAGE” appears again
and the menu can be run through once more.
The cursor marks the language currently set. The abbreviations stand
for:
– USA: American English
– GER: German
– U.K.: British English
– FRANCE: French
– SPAIN: Spanish
– ITALY: Italian
– FREE: open for other languages.
For more information please contact your Roche
Diagnostics subsidiary or local agent.
Setting the language
LA N G U A GE : U S A GER U . K .
FR A N C E SP A I N I TAL Y F R E E
SE T U P O K ?
NO Y E S
Procedure
To Next Page
Loading...