Roche Reflotron Plus User Manual

2.29
After centrifuging, use the plasma immediately for the respective
Reflotron test. Dispense the sample directly from the supernatant
using the Reflotron Pipette.
If you do not wish to perform the determination at once, the plasma
has to be separated from the sediment.
For the use and storage of the plasma sample, refer to the stability
data for the respective parameter in plasma.
Using the plasma
Reflotron Plus stores up to 60
results including the date and
time of the respective measure-
ment and the patient/sample
identification.
If more than 60 measurements
have been taken the oldest
result is automatically deleted.
The values remain in the
memory when the Reflotron
Plus is switched off.
(For deletion of results from
memory see “Individual
settings” in Section 2).
Storage and retrieval of results

Roche Reflotron Plus Specifications

General

Brand	Roche
Model	Reflotron Plus
Category	Laboratory Equipment
Language	English