Roche Reflotron Plus User Manual

2.30
When the Reflotron Plus is
“READY” the results can be
retrieved from memory.
Press the enter button “↵” to
retrieve the last value meas-
ured.
Then press the cursor button
“<” one or more times to see
the preceding values.
If there are no more results in
the memory or if the memory is
empty, the message shown on
the left appears. If you press
the button again you return to
the previously displayed result.
From any memory position, the
next value measured can be
called up by pressing the “>”
button until the latest result
obtained appears. After this the
message shown on the left
appears.
If no button is pressed for 10
seconds the instrument reverts
to the “READY” state.
The instrument can also be
returned to the “READY” state
at any time by pressing the
enter button “↵”.
Pressing the “↵” button again
displays the last value mea-
sured, pressing the “<” button
the preceding value measured.
15 . 0 5 . 01 09 :10 : 2 5
RE A D Y
NO E N T R Y
15 . 0 5 . 01 08 :13 : 0 4
GL U 12 8 . 0 m g/ d l
15 . 0 5 . 01 09 :11 : 3 4
RE A D Y
Retrieval of results
NO E N T R Y
15 . 0 5 . 01 09 :06 : 0 4
GG T 31 . 0 U / l 3 7 ° C

Roche Reflotron Plus Specifications

General

Brand	Roche
Model	Reflotron Plus
Category	Laboratory Equipment
Language	English