2.15
Keep the test strips away from
strong magnetic fields.
Magnetic fields can corrupt the
magnetic code. This is indicat-
ed by the display message
“MAGNETIC CODE MISREAD!”.
In almost all the test strips the
test area is covered by an
aluminium foil. This foil must be
removed before use.
Take hold of the loose end of
the protective foil as shown.
Peel off the protective foil
(made of aluminium/plastic)
right over the perforation and
discard in accordance with the
waste disposal guidelines
applicable in your practice or
laboratory.
Removing the protective foil
To Next Page
Loading...