Page
Labeling measurements performed with control material 3.18
Transfer of patient profiles to a computer system 3.19
– Profile transfer 3.19
– Profile transfer II 3.20
Printout of patient profiles 3.22
Printing out displayed text 3.23
4. Cleaning and Quality Checking
Cleaning the instrument 4.1
Checking the optical system with Reflotron Check 4.4
Checking the whole system with control sera 4.5
5. Display Messages and What They Mean
Routine messages 5.1
Operator messages 5.3
Error messages 5.4
6. Technical Information and Notes
Measuring principle 6.1
Software 6.3
Basic instrument settings 6.3
Printer operation 6.9
– Insertion of paper 6.9
– Changing the printer ribbon 6.9
Operation with RS 232 C interface 6.10
Temporary or permanent disuse 6.14
Technical data and specifications 6.15
Safety warning 6.18
Guarantee 6.19
General note 6.19
7. Index
8. Reflotron Tests
To Next Page
Loading...
Need help?
General
