Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 134

134 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 9 Parameter Descriptions
Adapter that has requested exclusive control of drive logic functions.
If an adapter is in local lockout, all other functions (except stop) on all other
modules are locked out and non-functional. Local control is obtained only when
the drive is stopped.
Parameter number whose value is written from a communications device data
table.
Parameters that can be changed only while the drive is stopped cannot be used as
Datalink inputs. Entering a parameter of this type disables the link
Refer to the appropriate communications option board manual for datalink
information.
Parameter number whose value is written from a communications device data
table.
Parameters that can be changed only while the drive is stopped cannot be used as
Datalink inputs. Entering a parameter of this type disables the link.
Refer to the appropriate communications option board manual for datalink
information.
Parameter number whose value is written from a communications device data
table.
300
301
Data In A1 - Link A Word 1
Data In A2 - Link A Word 2
Range: 0...387 [1]
Default: 0 (Disabled)
Access: 1 Path: Communication > Datalinks
See also:
302
303
Data In B1 - Link B Word 1
Data In B2 - Link B Word 2
Range: 0...387 [1]
Default: 0 (Disabled)
Access: 1 Path: Communication > Datalinks
See also:
304
305
Data In C1 - Link C Word 1
Data In C2 - Link C Word 2
Range: 0...387 [1]
Default: 0 (Disabled)
Access: 1 Path: Communication > Datalinks
See also: