Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 159

Rockwell Automation Publication D2-3518-4 - January 2020 159
Parameter Descriptions Chapter 9
The RMS phase-to-phase input voltage Vst is displayed as x.x V.
The RMS phase-to-phase input voltage Vtr is displayed as x.x V.
The DC bus voltage is displayed as x.x V.
The commanded active input voltage is displayed as x.x V DC.
The commanded reactive input voltage is displayed as x.x V DC.
8
Input Voltage ST
Range: 0.0...3276.7 V AC [0.1V AC]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
9
Input Voltage TR
Range: 0.0...3276.7 V AC [0.1V AC]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
10
DC Bus Voltage
Range: 0.0...3276.7V DC [0.1V DC]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
11
Active Voltage
Range: 0.0...3276.7V DC [0.1V DC]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
12
Reactive Voltage
Range: 0.0...3276.7V DC [0.1V DC]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also: