Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 175

Rockwell Automation Publication D2-3518-4 - January 2020 175
Parameter Descriptions Chapter 9
Increments when a DPI producer/consumer message times out.
Increments when DPI CAN bus is off.
Selects signals to map to a D/A test card.
Contains the present rectifier parameter access level. See Chapter 8
for more
information about parameter access levels.
163
PC Timeout Cnt
Range: 0...255
Default: Read Only
Access: 0 Path: Internal Data > DPI Counters
See also:
164
CAN Bus Off Cnt
Range: 0...65535
Default: Read Only
Access: 0 Path: Internal Data > DPI Counters
See also:
171
172
173
174
D/A Select (N)
Range: 0...65535
Default: Read Only
Access: 0 Path: Internal Data > D/A Output Sel
See also:
196
Param Access Lvl
Range: 0 = Basic
1 = Advanced
Default: 0
Access: 0 Path: Utility > Drive Memory
See also:
197
Reset to Defalts
Range: 0 = Ready
1 = Factory
2 = Low Voltage
3 = High Voltage
Default: 0
Access: 0 Path: Utility > Drive Memory
See also: