Rockwell Automation Publication D2-3518-4 - January 2020 177
Parameter Descriptions Chapter 9
This parameter is not used in the Liquiflo 2.0 rectifier.
Reserved for future alarms.
Reserved for inhibit bits.
Displays status of the rectifier digital inputs.
See AC Line I/O Board Description (Frame 3 Only)
on page 25 through
Combined I/O Board Description (Frame 4 Only)
on page 29 for a description
of I/O hardware that is present on this drive and is controlled by the rectifier.
211
Drive Alarm
Range:
Default: Read Only
Access: 0 Path: Utility > Status
See also:
214
Start Inhibits
Range:
Default: Read Only
Access: 0 Path: Utility > Status
See also:
216
Dig In Status
Range: Bits on/off
Default: Read Only
Access: 0 Path: Utility > Status
See also:
To Next Page
Loading...
